CR003 LF EM4200 EM4100 TK4100 4100D UART WG26/WG34 lêzermodule 3v of 5V
Basisynformaasje
25khz LF RFID-lêzermodule EM4200 EM4100 TK4100 UART / Weigand-modus
CR003 is in 125K-allinnich-lêzermodule fan EM4200 EM4100 TK4100 UART- of Weigand-modus dy't in 3v- of 5v-ferzje hat en op DIP28-grutte is.
Operasjonele en fysike skaaimerken
| Namme | CR003-searje Proximity Reader Module | |||
| Gewicht | 12g | |||
| Ofmjittings | 40mm (L) x 20mm (H) x 8mm (B) | |||
| Temperatuer | -40 s+85C | |||
| Ynterface | COMS UART of WG | |||
| Lêsberik | oant 8~12 sm | |||
| Frekwinsje | 125KHZ | |||
| Geskikt foar | uEM 4001 of kompatibel | |||
| EM4200, EM4100, TK4100, HT4168, 4100D | ||||
| Stromferplichting | DC3.0-5.5V, 30ma - 50ma | |||
| MCU | 51- 8-bit CPU | |||
Pinbeskriuwing en útfiergegevensformaten
| Pinnûmer | Beskriuwing | CR003T (ASCII) | CR003W (Wiegand) | CR003M | CR003A(ABAⅡ) |
| Pin 1 | D1 | TTL-gegevensútfier (Tx) | DATA1 Utfier | GegevensútfierManchester Code | DATA-útfier |
| Pin 2 | D0 | NC | DATA0 Utfier | NC | CLK |
| Pin 3 | CS | NC | NC | NC | CP |
| Pin 4 | GND | GND | |||
| Pin 5 | VCC | KRACHT (+4.6V - +5.4V DC) | |||
| Pin 15 | ANT1 | Nei antenne (L1 = 1000uH) | |||
| Pin 16 | ANT2 | Nei antenne | |||
| Pin 26 | GND | GND | |||
| Pin 27 | VCC | KRACHT (+4.6V - +5.4VDC) | |||
| Pin 28 | PIEP/LED | PIEPPER/LED | PIEPPER/LED | NC | PIEPPER/LED |
* Pin28 is PEEPER/LED-stjoerprogramma, nei gegevensútfier wurdt Pin28 leech ynsteld
CR003W01 = Wiegand26
CR003W02 = Wiegand26/34-skeakel
CR003W03 = Wiegand34
Dataformaten
CR003T-01Utfiergegevensstruktuer – ASCII (RS232.TTL) 9600 bps, N, 8,1
| STX (02H) | DATA(10 ASCII) | LRC (2 ASCII) | CR | LF |
| ETX (03H) |
[De 1 byte (2 ASCII-tekens), LCR is de Longitudinale Redundancy Check.]
Bygelyks:DATA: 62H E3H 08H 6CH EDH, LRC: (62H) XOR (E3H) XOR (08H) XOR (6CH) XOR (EDH)=08H, Utfier: 0X02 0X36 0X32 0X45 0X33 0X30 0X38 0X36 0X43 0X45 0X44 0X30 0X38 0X0D 0X0A 0X03
CR003T-02Utfiergegevensstruktuer – ASCII (RS232.TTL) 9600 bps, N, 8,1
| STX (02H) | DATA(10 ASCII) | LRC (1BYTEI) | ETX (03H) |
[De 1 byte (2 ASCII-tekens), LCR is de Longitudinale Redundancy Check.]
Bygelyks:DATA: 62H E3H 08H 6CH EDH, LRC: (62H) XOR (E3H) XOR (08H) XOR (6CH) XOR (EDH)=08H, Utfier: 0X02 0X36 0X32 0X45 0X33 0X30 0X38 0X36 0X43 0X45 0X44 0X08 0X03
CR003T-03Utfiergegevensstruktuer – ASCII (RS232.TTL) 9600 bps, N, 8,1
| DATA(10 ASCII) | CR |
[De 1 byte (2 ASCII-tekens), LCR is de Longitudinale Redundancy Check.]
Bygelyks:DATA: 62H E3H 08H 6CH EDH,
Utfier: 0X36 0X32 0X45 0X33 0X30 0X38 0X36 0X43 0X45 0X44 0X0D
CR003WUtfiergegevensstruktuer, bygelyks: Wiegand 26 bit
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| P(1) | E | E | E | E | E | E | E | E | E | E | E | E | O | O | O | O | O | O | O | O | O | O | O | O | P(2) |
| EVEN Pariteit (E) | ODD-pariteit (O) | ||||||||||||||||||||||||
P(1): Pariteit Start Bit, 2-13 bit EVEN Pariteit bit
P(2): Pariteitsstopbit, 14-26 bit ODD Pariteitsbit
Weigand
Dataformaat:
Skakeldiagram foar de CR003-module
